Designing Structural Components for Machines

Designing Structural Components for Machines
Citation:   Introductory Material, i-xiii  (doi: 10.13031/2013.29532)
Authors:   Segerlind, Larry J.
Keywords:   Structural Component, Machines
(Free Abstract )    (Download PDF)

Chapter 1 Structures and Machines
Citation:   Chapter 1, pp. 1-29  (doi: 10.13031/2013.29523)
Authors:   Segerlind, Larry J.
Keywords:   The Design Criteria: The Stress-Strain Diagram: The Factor of Safety: The Database: Coordinate Systems and Member Orientation; Section Properties; Systems of Units; Significant Digits.
(Free Abstract )    (Download PDF)

Chapter 2 Reviewing the Basics
Citation:   Chapter 2, pp. 31-69  (doi: 10.13031/2013.29524)
Authors:   Segerlind, Larry J.
Keywords:   The Simple or Average Stresses; The Normal Stress in Straight Bars; Bolts and Rivets in Shear; Pins in Double Shear; Bearing Stresses; Plug Shear; Axial Force Diagrams; Normal and Shear Stresses in Beams; Section Properties for Composite Shapes; Shear Force and Bending Moment Diagrams; Combined Loading Diagrams.
(Free Abstract )    (Download PDF)

Chapter 3 Computers and Design
Citation:   Chapter 3, pp. 71-105  (doi: 10.13031/2013.29525)
Authors:   Segerlind, Larry J.
Keywords:   The Analysis Procedure; Structural Models; Checking Your Knowledge of the Software; Design Ratios; Verifying the Design; Design Assistance; Calculating the Nodal Coordinates
(Free Abstract )    (Download PDF)

Chapter 4 Designing for Axial Tension
Citation:   Chapter 4, pp. 107-125  (doi: 10.13031/2013.29526)
Authors:   Segerlind, Larry J.
Keywords:   Allowable Normal Stress; Commentary on the Allowable Normal Stress; Welded Tension Members; Threaded Tension Members; Threaded Bars with Upset Ends; Bolted Tension Members
(Free Abstract )    (Download PDF)

Chapter 5 Designing for Axial Compression
Citation:   Chapter 5, pp. 127-148  (doi: 10.13031/2013.29527)
Authors:   Segerlind, Larry J.
Keywords:   Euler's Critical Buckling Load Equation; End Conditions; Allowable Compressive Stress; Allowable Compressive Load; Design Assistance; Relative Strength of Sections; Column Design.
(Free Abstract )    (Download PDF)

Chapter 6 Designing Connections for Axial Loadings
Citation:   Chapter 6, pp. 149-185  (doi: 10.13031/2013.29528)
Authors:   Segerlind, Larry J.
Keywords:   Designing Bolted Connections, Design of a Bolted Joint, Designing Welded Connections, Design of a Welded Joint, Designing Pin-Connected Members, Plate Links, Eyebars, Design Assistance, Designing Brackets.
(Free Abstract )    (Download PDF)

Chapter 7 Designing for Pinned Trusses
Citation:   Chapter 7, pp. 187-221  (doi: 10.13031/2013.29529)
Authors:   Segerlind, Larry J.
Keywords:   Classical Pinned Trusses; Computer Solution of Pinned Trusses; Checking the Solution; Checking Your Knowledge of the Software; Design of a Pinned Truss; First Design Example; Second Design Example; Design of a Three-Member Bracket; Member Selection; Design of the Welded Connections; Design of the Gusset Plates.
(Free Abstract )    (Download PDF)

Chapter 8 Designing for Bending
Citation:   Chapter 8, pp. 223-269  (doi: 10.13031/2013.29530)
Authors:   Segerlind, Larry J.
Keywords:   Allowable Normal and Shear Stresses; Noncompact Square and Rectangular Tubes; Compact Square and Rectangular Tubes; Circular Tubes; Solid Round, Square, and Rectangular Bars; Design Assistance; Beam Design: Uniform Depth Sections;Beam Design: Top and Bottom Plates; Beam Design: Tapered Beams; A Tapered Beam with End Moments; Tapered Beam with Zero End Moments; Computer Analysis of Beams; Checking Your Knowledge of the Software
(Free Abstract )    (Download PDF)

Chapter 9 Designing for Torsion
Citation:   Chapter 9, pp. 271-297  (doi: 10.13031/2013.29531)
Authors:   Segerlind, Larry J.
Keywords:   Section Properties; Circular Bars and Tubes; Solid Rectangular Bars; Thin-wall Tubes; Relative Strength of Structural Shapes; Stability of Thin-walled Circular Tubes; Twisting Moment Diagrams; Design Criteria; A System of Torsion Members; Design Examples; Design Assistance.
(Free Abstract )    (Download PDF)

Chapter 10 Designing for Combined Loads: Axial and Bending
Citation:   Chapter 10, pp. 299-333  (doi: 10.13031/2013.29518)
Authors:   Segerlind, Larry J.
Keywords:   Design Criteria for Axial Tension and Bending; A Design Example; Design Criteria for Axial Compression and Bending; A Design Example; Effective Length Factor; Design Assistance; Analysis of a Plane Frame; The Equilibrium Analysis; The Member Force Diagrams; Evaluation of the Stress Ratios; Analysis of Frames with Curved Members; Member Releases in Plane Frames; A Design Example; Checking Your Knowledge of the Software
(Free Abstract )    (Download PDF)

Chapter 11 Designing for Combined Loads: Torsion and Bending
Citation:   Chapter 11, pp. 335-359  (doi: 10.13031/2013.29519)
Authors:   Segerlind, Larry J.
Keywords:   Design Criteria for Torsion and Bending; The Analysis of a Plane Grid; Checking Your Knowledge of the Software; A Design Example.
(Free Abstract )    (Download PDF)

Chapter 12 Designing for Combined Loads: Welded Connections
Citation:   Chapter 12, pp. 361-386  (doi: 10.13031/2013.29520)
Authors:   Segerlind, Larry J.
Keywords:   Welds for Structural Tubes; Shear Flow in Fillet Welds; A Coordinate System; Axial and Shear Forces; Moments about the z Axis: Bending; Moments about the x Axis: Torsion; Section Properties for Intermittent Welds; Resultant Shear Flow; Analysis of Welded Connections; A Welded Joint in a Plane Frame; A Welded Joint in a Plane Grid; A Weld for a Bracket; Design of Welded Connections.
(Free Abstract )    (Download PDF)

Chapter 13 Design of a Floor Crane
Citation:   Chapter 13, pp. 387-415  (doi: 10.13031/2013.29521)
Authors:   Segerlind, Larry J.
Keywords:   Design Objective and Requirements; Preliminary Calculations; A Model for Hydraulic Cylinders; The Frame Members; Setting the Dimensions; Vertical Range of the Lift Arm; Design of the Frame System; The Lift Arm; The Column; The Base Weld; Design of the Connections; The Pin Diameter; The Side Plates; The Brackets; Design of the Grid System; The Torsion Member; The Leg Beams; The Fillet Weld; Summary of the Design.
(Free Abstract )    (Download PDF)

Chapter 14 Design Projects
Citation:   Chapter 14, pp. 417-447  (doi: 10.13031/2013.29522)
Authors:   Segerlind, Larry J.
Keywords:   Specifications, Design Parameters, Design Report, The Pinned Truss in a Roof Hoist, A Three-Member Bracket, An Eyebar, A Tapered Beam, A Reinforced Beam, A Pallet Fork, Frames for a Portable Irrigation System, A Wheel Assembly, A Plane Grid in a Trailer, A Plane Grid for a Trailer-Type Crop Sprayer, A Log Hoist, A Forklift, A Single-Arm Utility Hoist, The Arm for a Front-End Loader.
(Free Abstract )    (Download PDF)

Appendix A Specifications and Code
Citation:   Appendix A: Specifications and Code, pp. 449-463  (doi: 10.13031/2013.29515)
Authors:   Segerlind, Larry J.
Keywords:   Design Basis, Units, Materials and Dimensions, Design for Axial Tension, Design for Axial Compression, Design for Bending, Design for Torsion, Design for Combined Loadings, Design of Fillet Welds
(Free Abstract )    (Download PDF)

Appendix B Section Properties
Citation:   Appendix B: Section Properties, pp. 465-527  (doi: 10.13031/2013.29516)
Authors:   Segerlind, Larry J.
Keywords:   Equations for the Section Properties, Section Property Values for the USCS Sections, Section Property Values for the SI Sections, Section Property Values for Some Channel Sections, Section Property Values for Some Pairs of Angles.
(Free Abstract )    (Download PDF)

Appendix C Design Assistance Tables
Citation:   Appendix C: Design Assistance Tables, pp. 529-544  (doi: 10.13031/2013.29517)
Authors:   Segerlind, Larry J.
Keywords:   Axial Tension and Axially Loaded Connections, Appendix C2 Axial Compression, Appendix C3 Design for Bending, Appendix C4 Design of Fillet Welds
(Free Abstract )    (Download PDF)

References and Index
Citation:   References and Index, pp. 545-551  (doi: 10.13031/2013.29533)
Authors:   Segerlind, Larry J.
Keywords:   References and Index
(Free Abstract )    (Download PDF)