Click on “Download PDF” for the PDF version or on the title for the HTML version.
If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.
50-ohm RF technology based applicator design and fabrication for disinfestation of insect pests in stored grains
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.orgCitation: 2018 ASABE Annual International Meeting 1801011.(doi:10.13031/aim.201801011)
Authors: R. J. Macana, T. T. Moirangthem, O. D. Baik
Keywords: 50-ohm radio frequency, Design, Disinfestation, Insect pests, RF applicator, Stored grains, Non-chemical method
Disinfestation using conventional radio frequency energy has been studied as an alternative method for disinfestation of stored grains using chemicals (fumigants and pesticides) but no study has been done for disinfestation using the 50-ohm RF heater which is more advantageous than the former. These methods offer many advantages (chemical-free, volumetric, and fast) over the traditional methods of disinfestation. However, the conventional RF heater has not yet widely industrialized even though it has been studied for many years because of the non-uniform heating problem of the applicator. Therefore, this study dealt with the design and fabrication of an auger-type applicator to solve the problems of heating uniformity and application of 50-ohm RF technology for disinfestation. The auger-type applicator has two electrodes (hot and ground) attached to the tubular channel (30 cm diameter) and it has an auger driven by a motor (1-200 rpm) that stirs and conveys the grain continuously until it passes the electrodes (0.7 m length and 0.3 m width). The applicator is connected to the automatic matching network (AMN) and AMN is connected to the 15 kW and 27.12 MHz generator using 50-ohm coaxial cable. The diameter of the tubular channel applicator is 30 cm and can disinfest approximately 40 to 45 kg of wheat and canola. The materials are aluminum (electrode), polypropylene (tubular channel and auger), copper (welding cable connector between AMN and applicator), and expanded metal (casing for the applicator). Furthermore, this study expects an improvement of the heating uniformity of the applicator because of the auger that stirs and conveys the grains while heating; and a positive application of 50-ohm RF technology for disinfestation of stored grains.(Download PDF) (Export to EndNotes)