Click on “Download PDF” for the PDF version or on the title for the HTML version.
If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.
A discrete element model of soil-tool-residue interaction for tillage operation
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.org
Citation: 2018 ASABE Annual International Meeting 1800402.(doi:10.13031/aim.201800402)
Authors: Zhiwei Zeng, Ying Chen
Keywords: calibration, crop residues, DEM, sweep, validation.
Abstract. Understanding the working mechanism of tillage tools and their interactions with residue and soil is important for designing the tillage tools. In this study, a soil-tool-residue interaction model was developed for a sweep using the discrete element method (DEM). Soil, sweep, and straw were modelled using particles, walls, and clumps respectively. A virtual field consisted of two layers including a bottom soil layer and a top residue layer was constructed. The sweep was scanned and imported into the model. Oat residue samples were collected in a field and their mechanical properties were measured in the lab. Model parameters were measured or taken from the literature. As the sweep travelled through the virtual field, model behaviors including soil moving area, straw moving area, and straw forward displacement were monitored. Comparing the simulated values of soil and straw moving areas with those calculated from analytical models, the calibrated model parameters of particle stiffness and clump stiffness were 8.73e3 and 3.32e2 N m-1 respectively. The average forward displacement of oat straws was 189 mm, which had a relative error of 9.2% as compared with the measurement data in the literature. The proposed DE model can be applied to shorten and enhance the design of tillage equipment in dealing with crop residues.
(Download PDF) (Export to EndNotes)