Click on “Download PDF” for the PDF version or on the title for the HTML version.
If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.
Characterization of Biological Pesticide Deliveries through Hydraulic Nozzles
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.orgCitation: Transactions of the ASABE. 61(3): 897-908. (doi: 10.13031/trans.12698) @2018
Authors: Liping Xiao, Heping Zhu, Matthew Wallhead, Leona Horst, Peter Ling, Charles R. Krause
Keywords: Biopesticide, Crop protection, Deposition, Droplet size, Spray coverage.
Abstract. Increased use of biopesticides has spurred demand for efficient and effective delivery systems. To this goal, laboratory tests were conducted to investigate six different classes of biopesticides discharged from five different types of flat-fan nozzles, each with three flow capacities. The biopesticide classes were horticultural oil insecticide (HOI), bacterial biofungicide (BBF), botanical extract bio-insecticide (BEBI), liquid fungal bio-insecticide (FBI-ES), wettable powder fungal bio-insecticide (FBI-WP), and mineral salt biofungicide (MSBF). Droplet size distribution, spray pattern width, spray deposition, and coverage on plant leaves and water-sensitive paper (WSP) were the spray parameters tested. These parameters varied greatly with biopesticide class, nozzle type, and nozzle flow capacity. The DV0.5 of the biopesticides ranged from 75 to 519 μm for 0.76 L min-1 nozzles, from 86 to 509 μm for 1.51 L min-1 nozzles, and from 99 to 622 μm for 2.25 L min-1 nozzles. The use of different biopesticides with the same nozzle significantly altered the spray pattern width. Compared to a water-only solution, the largest change of spray pattern width was 14.7% for the air-induction nozzle (AI11004) discharging FBI-ES. The amount of spray deposited on plant leaves for all tested biopesticides (except HOI) did not vary significantly with different nozzle types. However, the air-induction nozzles produced the most uneven spray deposition patterns. Therefore, to achieve optimal spray application efficiency and effectiveness for discharging specific classes of biopesticide, the choice of the proper nozzle type and flow capacity is critical.(Download PDF) (Export to EndNotes)