Click on “Download PDF” for the PDF version or on the title for the HTML version.
If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.
Finite Element Modeling and Simulations to Investigate the Relationship between the Cone Index Profile and Draft Requirements of a Compaction Profile Sensor with Depth
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.orgCitation: Transactions of the ASABE. 61(1): 37-43. (doi: 10.13031/trans.12223) @2018
Authors: Qingsong Zhang, Shrini K. Upadhyaya, Qingxi Liao, Pedro Andrade-Sanchez
Keywords: Cone index, Compaction profile sensor, Finite element modeling, Soil penetration resistance.
Abstract. Previous research conducted using a compaction profile sensor and a standard cone penetrometer over a wide range of soil types and conditions found that the unit pressure acting on the cutting edge, defined as the cone index equivalent (CIE), at a specific depth (d) was related to the cone index (CI) value at that depth, the depth of the cutting edge (d), and the interaction between CI and the depth of the cutting edge (i.e., CI x d) with a very high coefficient of multiple determination irrespective of the soil type and conditions. The objective of this study was to provide an analytical basis for the relationship between CIE and CI. A two-dimensional axisymmetric model for soil-cone interaction and a three-dimensional model for soil-tine interaction were developed using a finite element method (FEM). A non-linear elasto-plastic constitutive behavior along with the Drucker-Prager yield criterion were used to represent the soil cutting process. Simulations studies were conducted in 25 distinct soil types and conditions, and the results indicated a similar relationship between CIE and CI, as observed in the previous research. These results support the existence of a strong theoretical basis for the empirical relationship observed in the previous research.(Download PDF) (Export to EndNotes)