Click on “Download PDF” for the PDF version or on the title for the HTML version.
If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.
Milling Yields and Physicochemical Properties of Long-Grain Rice Thickness Fractions
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.orgCitation: Applied Engineering in Agriculture. 32(6): 915-923. (doi: 10.13031/aea.32.11537) @2016
Authors: Brandon C. Grigg, Terry J. Siebenmorgen
Keywords: Chalkiness, Crude protein, Functionality, Head rice yield, Kernel dimensions, Milled rice yield, Thickness grading.
Thickness grading of rice ( L.) can divert thin, chalky kernels to a secondary processing stream, thus improving milling yields of the primary stream. However, the quantity and functionality of the secondary stream may impact processing operations. Rough rice of multiple long-grain cultivar lots was either left unfractioned (Unf) or thickness graded into fractions comprising A (< 1.7 mm), B (1.7 << 1.9 mm), C (< 1.9 << 2.0 mm), D (2.0 << 2.05 mm), and E (> 2.05 mm). Mass distribution of rough rice; milled rice yield (MRY), and head rice yield (HRY); kernel dimensions of brown rice; crude protein content (CP) and chalkiness of brown and head rice; and paste viscosities of head rice flour were determined for each cultivar lot/fraction. For all cultivar lots, MRY, HRY, and kernel dimensions increased with increasing thickness fraction, while chalkiness and CP decreased. Milling yields were the greatest for the C/D/E fractions. Including the C fraction (C/D/E) with the primary stream resulted in an average 17.4 percentage point mass increase compared to D/E alone; this with minimal impacts to milling yields of the primary stream. Weighted-average MRYs and HRYs of the combined C/D/E fractions increased by up to 6.9 and 12.8 percentage points, respectively, compared to Unf rice. The A/B fractions were generally of greater chalkiness and CP; however, paste viscosities remained relatively consistent with those of the C/D/E fractions. Thickness grading could be justified on the merits of improved milling yields, kernel uniformity, and reduced chalkiness of the primary processing stream. A small change in the thickness grading procedure decreased the quantity of the secondary stream; moreover when milled, the secondary stream retained functionality similar to the primary stream.(Download PDF) (Export to EndNotes)