American Society of Agricultural and Biological Engineers



Click on “Download PDF” for the PDF version or on the title for the HTML version.


If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.

Low-Moisture Anhydrous Ammonia (LMAA) Pretreatment of Corn Stover

Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.org

Citation:  Paper number  131619521,  2013 Kansas City, Missouri, July 21 - July 24, 2013. (doi: http://dx.doi.org/10.13031/aim.20131619521) @2013
Authors:   Minliang Yang, Weitao Zhang, Kurt A. Rosentrater
Keywords:   Ammonia biomass cellulosic ethanol pretreatment.

Abstract. Ethanol has been widely used as an alternative to fossil fuels. In recent years, much attention has been devoted to ethanol production from lignocellulosic biomass. In previous research, low-moisture anhydrous ammonia (LMAA) pretreatment was investigated due to its high efficiency and less washing compared to other pretreatment methods. The purpose of this study was to determine optimal conditions resulting in highest glucose yield and lowest ammonia input using the LMAA processing. In this experiment corn stover was used with different moisture contents (20, 50, 80 wb %) and particle sizes (<0.09, 0.09-2, >2 mm). Corn stover was ammoniated with a loading rate of 0.1g NH3 /g biomass. Ammoniated corn stover then was subjected to different pretreatment times (24, 72,144 h). After that, compositional analysis, including ash content, moisture content, structural carbohydrates and lignin in biomass, and enzymatic digestibility were used to determine the glucose yield. This study focused on designing a pretreatment method which could improve the efficiency of pretreatment processing.

(Download PDF)    (Export to EndNotes)