Click on “Download PDF” for the PDF version or on the title for the HTML version.
If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.
Effect of Swirl Chamber Geometric Configuration on the Spray Cone Angle Characteristics of a Swirl Nozzle for Use on Equipment for Teaching Chemical Pesticide Application Technology
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.org
Citation: Paper number 131594839, 2013 Kansas City, Missouri, July 21 - July 24, 2013. (doi: http://dx.doi.org/10.13031/aim.20131594839) @2013
Authors: Adewunmi Taiwo
Keywords: Swirl-Nozzle Swirl Chamber Length: Diameter Ratio Spray Cone angle Chemical PesticideApplicationTechnology.
Abstract. Authorities at the supervising organization of Universities in Nigeria have proposed intensive local development of workshop and laboratory equipment as one effective way of solving this problem of lack of laboratory and workshop equipment for practical classes and research. It is in this view that the objectives of this study were to develop a swirl nozzle for use on a locally developed test equipment on which Spray cone angle tests were carried out on three developed swirl nozzle prototypes with swirl chamber length: diameter ratios of 0.25, 0.50 and 1.00 respectively. Each swirl nozzle prototype was mounted in sequence on a calibrated test rig and had the spray cone angles formed by the discharge tested at a nozzle supply pressure of 300 kPa while installed with 7 orifice plates, each of which, had a single orifice of 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 mm diameter drilled respectively in its centre.The tests were repeated for nozzle supply pressures of 250 and 200 kPa respectively. When the generated spray cone angle data were subjected to statistical analysis, the results showed that both the swirl chamber length: diameter ratio and exit orifice diameter had significant effect on the spray cone angle formed by the nozzle discharge at a level of significance, α = 0.05. The best combination of the studied treatment levels for generating high spray cone angle was a 300 kPa nozzle supply pressure, swirl chamber length: diameter ratio of 1.00 and exit orifice diameter of 4.0 mm.
(Download PDF) (Export to EndNotes)