Click on “Download PDF” for the PDF version or on the title for the HTML version.
If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.
Fluid-Structure Interaction Analysis on Pressure-Compensating Emitters
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.org
Citation: Paper number 131597386, 2013 Kansas City, Missouri, July 21 - July 24, 2013. (doi: http://dx.doi.org/10.13031/aim.20131597386) @2013
Authors: Zhengying Wei, Xing Zhou, Weijing Yuan, Guangxi Zhao
Keywords: Pressure-compensating emitter Fluid-structure interaction Adaptive mesh repair SST k-? turbulence model Contact analysis.
Abstract. Pressure-compensating (PC) emitters can maintain a constant discharge within a wide range of working pressures, thus they have extensive application prospect in mountain regions where the hydraulic pressure in irrigation systems often changes greatly. Although the rapid design method for non-PC emitters based on CFD is quite mature at present, common CFD method is not suitable for the design of PC emitters because there exists a two-way coupling interaction between the fluid flow and elastic diaphragm. In order to improve the design accuracy and efficiency of PC emitters, the fluid-structure interaction (FSI) analysis was studied in this paper. In the FSI analysis procedure, adaptive mesh repair was adopted to refine the distorted fluid mesh. Incremental method and displacement-pressure finite element formula were used for the nonlinear analysis of the incompressible material. In this paper, SST K-ω turbulence model was used for the fluid analysis, while contact analysis method and Neo-Hookean Mooney-Rivlin rubber material model were adopted for the structure analysis. The results showed that the discharge was adjusted by a very small deformation of the diaphragm to reach a steady state. At last, compared with the test results carried out using the test samples made by rapid prototyping, the analyzed values were a little larger while the maximum relative deviation was within 2.5%. This verified that PC emitter's discharge could be predicted by FSI analysis accurately. In conclusion, FSI analysis is an efficient way to improve the design accuracy and reduce the test times for PC emitters.
(Download PDF) (Export to EndNotes)