Click on “Download PDF” for the PDF version or on the title for the HTML version.

If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.

Comparison of Ammonia Emissions from Poultry Houses Based on Diurnal Integration vs. Daily Means of Gas Concentration and Building Ventilation Rate

Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan

Citation:  2012 IX International Livestock Environment Symposium (ILES IX)  ILES12-0965.(doi:10.13031/2013.41543)
Authors:   Yongxing Chen, Hongwei Xin, Hong Li, Timothy Shepherd, Morgan Hayes, John Stinn, Robert Burns, Richard Gates, Hongmin Dong
Keywords:   Poultry, air emission, measurement method

Quantification of aerial emissions from animal feeding operations (AFOs) requires the knowledge of both concentration of the constituent of interest and the ventilation rate (VR) through the emitting source. Daily emissions can be and are normally determined from diurnal integration of frequent measurements, referred to as the diurnal integration method (DIM), but is resource intensive. Alternatively, daily emission may be more economically estimated from daily means of concentration and VR, referred to as diurnal means method (DMM). In this study, DMM was compared with DIM in determining daily ammonia (NH3) emissions from mechanically ventilated laying-hen, turkey and broiler houses under U.S. production conditions. Results show that deviations in daily NH3 emissions between DMM and DIM methods ranged from as small as < 3% (e.g., for medium age turkey under both cold and warm weather conditions) to as high as 98% (e.g., broiler houses in summer). Deviations were related with coefficient of variation (CV) of VR or NH3 concentration, although prediction of the deviation using CV of VR and/or NH3 concentration alone will likely not produce reliable results. The study suggests that caution must be taken when using DMM to estimate daily NH3 emissions from poultry houses under typical US production conditions.

(Download PDF)    (Export to EndNotes)