American Society of Agricultural and Biological Engineers



Click on “Download PDF” for the PDF version or on the title for the HTML version.


If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.

Engineering Properties and Economics of Soil Cement Feedyard Surfacing

Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.org

Citation:  Paper number  012282,  2001 ASAE Annual Meeting. (doi: 10.13031/2013.3521) @2001
Authors:   David B. Parker, Joey E. Mehlhorn, Michael S. Brown, Stefan C. Bressler
Keywords:   feedyard, feedlot, earthen, surface, manure, soil cement, fly ash, concrete

Soil cement, a compacted mixture of soil and portland cement, has been used successfully in the past for surfacing roads and airports. Hard surfacing is being evaluated by open-lot beef cattle feedyard owners as a means to improve manure quality and increase animal performance. In this research, the engineering properties and economics of using soil cement were evaluated using Amarillo fine sandy loam, one of the most common granular soils in the Texas Panhandle region. Soil cement specimens were prepared in compaction molds to determine the optimum moisture content and cement content for compaction. Specimens were subjected to field conditions including exposure to manure for nine months, then subjected to unconfined compressive strength tests, freezing-thawing tests, and wetting-drying tests. The unconfined compressive strength of soil cement increased linearly with cement content between 5 and 20 percent (R 2 =0.99). At a cement content of 7.5 percent, the specimens disintegrated when exposed to field conditions for nine months, while the specimens at 15 percent cement stayed intact. Exposure to manure for nine months did not affect unconfined compressive strength or mass lost during freezing-thawing and wetting-drying. The total cost for installing a 15 cm thick soil cement surface was estimated to be $8,110 per pen. The annual breakeven cost at a discount rate of 8% and payback period of five years was $2,031 per pen. Based on documented benefits from related research, potential returns of $5,200 per pen might be realized from improved animal performance.

(Download PDF)    (Export to EndNotes)