Click on “Download PDF” for the PDF version or on the title for the HTML version.


If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.

Spray Deposition and Drift Characteristics of a Low Drift Nozzle for Aerial Application at Different Application Altitudes

Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.org

Citation:  2010 Pittsburgh, Pennsylvania, June 20 - June 23, 2010  1008374.(doi:10.13031/2013.29961)
Authors:   Y Huang, S J Thomson
Keywords:   spray nozzle, aerial application, droplet spectra, spray deposition, spray drift

A complex interaction of controllable and uncontrollable factors is involved in aerial application of crop production and protection materials. Although it is difficult to completely characterize spray deposition and drift, these important factors can be estimated with appropriate sampling protocol and analysis. Application height is an important variable influencing off-target spray drift, but this variable has not been easily measured or logged. A custom-configured aircraft-mounted laser with logging capabilities makes this possible. This study was designed to investigate droplet size and deposition characteristics of a low drift CP flat-fan nozzle at application altitudes 3.7 m, 4.9 m, and 6.1 m. In the study, CP flat-fan nozzles were set to a downward angle of 30 degrees applying a mixture of water, Syl-Tac adjuvant, and Rubidium Chloride (RbCl) tracer at a 28.5 L/ha application rate. Spray droplets were collected using water sensitive paper (WSP) cards placed in the spray swath. Mylar sheets were also placed in the swath and downwind for drift sampling. Statistical analysis indicated that median droplet diameter as determined by WSP in the spray swath was not significantly influenced by spray application height. Similarly, statistical analysis also indicated that concentration of RbCl tracer from Mylar samplers in the spray swath was not significantly influenced by application height. Application height had a significant effect on spray deposition from drift samplers, along with wind direction and relative humidity. Final results for drift samplers may have been influenced by shifts in wind direction that altered the relationship between orientation of samplers and wind.

(Download PDF)    (Export to EndNotes)