Click on “Download PDF” for the PDF version or on the title for the HTML version.

If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.

Optimization of Synthesis of Polyurethane Foam Prepared from Liquefied Corn Stover by Response Surface Methodology

Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan

Citation:  2010 Pittsburgh, Pennsylvania, June 20 - June 23, 2010  1009593.(doi:10.13031/2013.29938)
Authors:   Tipeng Wang, Zongming Zheng, Zhihuai Mao
Keywords:   Liquefaction, Polyurethanes, Response surface methodology

Polyurethane (PU) foam was prepared from no pretreated liquefied corn stover (LCS) and polymethylene polyphenylisocyanate (PAPI). Response surface methodology (RSM) was employed to model the co-polymerization of LCS and PAPI and to optimize the process conditions for the maximum tensile strength of polyurethane foams. A total number of 36 runs was carried out following a quadratic regression rotational combinational design in order to evaluate the effects and interaction effects of four variable parameters, namely [NCO]/ [OH] ratio, blowing agent (water) concentration, ratio between catalysts (triethylamine : dibutyltine dilaurate) and surfactant (silicone) concentration. The analysis of ANOVA of the quadratic orthogonal regression model revealed that the model has high significance. The maximum tensile strength of 1.64 MPa was obtained at the optimal conditions: [NCO]/ [OH] ratio 0.7, blowing agent concentration 4.7%, surfactant concentration 1.27% and the ratio between catalysts 1:1.

(Download PDF)    (Export to EndNotes)