Click on “Download PDF” for the PDF version or on the title for the HTML version.

If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.

Testing Fuel Efficiency of a Tractor with a Continuously Variable Transmission

Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan

Citation:  Applied Engineering in Agriculture. 26(1): 31-36. (doi: 10.13031/2013.29468) @2010
Authors:   B. A. Coffman, M. F. Kocher, V. I. Adamchuk, R. M. Hoy, E. E. Blankenship
Keywords:   Tractor testing, Continuously Variable Transmission (CVT), Fuel consumption, Fuel efficiency, Specific fuel consumption

A John Deere 8530 IVT tractor (Waterloo, Iowa) with a continuously variable transmission (CVT) that could be operated in automatic (CVT) or manual (fixed gear ratio) mode was tested for fuel consumption at a setpoint travel speed of 9 kmh-1 with 17 different drawbar loads. Linear regression analysis results showed that with the throttle set to maximum in both transmission modes, operating the tractor with the transmission in the automatic mode was more fuel efficient than operating with the transmission in the manual mode when the drawbar power was approximately 78%, or less, of maximum power. When load transition portions of the data were filtered out, there was no significant effect of load sequencing in the remaining data. On the other hand, there was a noticeable effect of travel direction which could occur due to a minor slope of the test track in the direction of travel. Testing of more tractor models from different manufacturers and at different travel speeds is needed to determine if these results can be applied to different tractor models produced by the same and/or other manufacturers.

(Download PDF)    (Export to EndNotes)