Click on “Download PDF” for the PDF version or on the title for the HTML version.

If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.

Laboratory Performance of a Mass Flow Sensor for Dry Edible Bean Harvesters

Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan

Citation:  Applied Engineering in Agriculture. 26(1): 11-20. (doi: 10.13031/2013.29466) @2009
Authors:   R. S. Zandonadi, T. S. Stombaugh, S. A. Shearer, D. M. Queiroz, M. P. Sama
Keywords:   Mass Flow Sensor, Laboratory Performance, Precision Agriculture, Yield Monitor, Edible bean harvester

Due to the importance of yield monitoring, researchers have been developing systems for crops such as tomatoes, forage, sugar cane, citrus, and coffee. A yield monitoring system for pull type dry edible beans harvester has not yet been developed. The goal of this project was to design and test a drive torque measurement device on a clean grain bucket elevator of a dry bean harvester, and evaluate its potential to be used as a mass flow sensor. Tests were conducted in the Yield Monitor Test Facility (YMTF) of University of Kentucky following the recommendation of ASABE Standard S578 (2007) The device was tested within the flow rate range of 0 to 3.4 kg/s. The largest flow rate errors were 4.2% at 3.3 kg/s and 4% at 1.6 kg/s. The average accumulated mass errors of the sensor were less than 3.1% and the maximum accumulated error was 4.9% at a flow rate of 1.8 kg/s.

(Download PDF)    (Export to EndNotes)