ASABE Technical Library - Abstract
Member and Access Notice
Kinetics of surface color change during moist-air impingement processing of meat patties
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.org
Citation: 2009 Reno, Nevada, June 21 - June 24, 2009 096802.(doi:10.13031/2013.27361)Authors: Sanghyup Jeong, Bradley P Marks
Keywords: Color, non-enzymatic browning, modeling, meat, impingement oven
Non-enzymatic browning in food processing is a major contributor to surface color, aroma, and flavor. The reaction is very complex and is affected by many factors, such as temperature, pH, and water activity. Color development on the surface of meat products cooked in commercial-scale, moist-air impingement processes is highly influenced by the dynamic surface water state caused by condensation and then evaporation. Therefore, the goal of this project was to modify conventional kinetic modeling for color change to be a function of product surface temperature and the water status at the surface of the product. To measure surface color, surface temperature, and crust moisture content, beef patties (three replicates per treatment) were processed at three temperatures (121, 177, and 232C), three humidity levels (10, 70, and 90%Mv), and five cooking durations in a pilot-scale moist-air impingement oven. During the cooking process, center and surface temperature of the sample were recorded. After cooking, the surface color was measured using a colorimeter, and the surface moisture content was determined by the air-oven method. Across all conditions, surface lightness (L*) decreased from ~50 to 25, and surface (crust) moisture content decreased to ~48%wb. A conventional model was compared with a modified model, in which a dew point temperature and product surface temperature were used to quantifying the dynamic water state on the product surface. The modified model was ~20% more accurate than the conventional model.
(Download PDF) (Export to EndNotes)