ASABE Technical Library - Abstract
Member and Access Notice
Geotechnical Characterization of Steep Slopes on Reclaimed Mine Lands in East Tennessee
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.org
Citation: 2009 Reno, Nevada, June 21 - June 24, 2009 096720.(doi:10.13031/2013.27274)Authors: Patrick Hamilton White, Eric C Drumm, John S Schwartz, Amy M Johnson
Keywords: Tennessee, Density, Density Grids, Slopes, Stability, Nuclear Density Gauge, Unit Weight, Grain Size Distribution, Void Ratio, Porosity, Infinite Slope Analysis
Over compaction of mine spoil after the Surface Mining Control and Reclamation Act of 1977 has led to reclaimed mine lands which will not grow economically viable native hardwood forests. This has been remedied by using the low compaction grading technique. This construction technique attempts to balance stability which utilizes compaction, and tree growth which needs a looser growing medium. The physical characteristics of reclaimed mine slopes using the low compaction grading technique were studied. Several methods to measure unit weight were examined including using a nuclear density gauge and two different replacement methods similar to the sand cone density test. Also, grain size distributions were calculated for the three areas studied. The in-situ angle of the material and the internal friction angle of the material were measured and used in a simple infinite slope analysis to determine slope stability. It was found that the unit weight reading were highly variable which is mainly due to the variable nature of the material. Also, it was found that there was no correlation between density and depth which suggests that the material had not been heavily compacted. Next, it was found that the low compaction grading technique provides a suitable tree root growth medium due to low unit weights and high void ratios. Lastly, it was found that the infinite slope analysis provided sufficient factor of safety values with an upper bound of 1.9. These values were acceptable because of the low cost and consequences of failure of a surface mine slope.
(Download PDF) (Export to EndNotes)