ASABE Technical Library - Abstract
Member and Access Notice
Dynamic Mechanical Properties of Polyurethane Foams Prepared From Liquefied Corn Stover with PMDI
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.org
Citation: 2009 Reno, Nevada, June 21 - June 24, 2009 096443.(doi:10.13031/2013.27176)Authors: Changchun Hao, Zhihuai Mao, Ying Zheng, Dong Li, Xinrui Deng
Keywords: Dynamic mechanical properties, polyurethane foams, liquefied corn stover, PMDI, isocyanate index
Influences of isocyanate index on the dynamic mechanical properties of polyurethane foams prepared from liquefied corn stover with PMDI were studied using a dynamic mechanical analysis (DMA). Frequency sweep tests at 25C and temperature sweep tests from 40C to 140C were applied to the polyurethane foam samples. The storage modulus of the polyurethane foam samples at 25C increased with the increasing of isocyanate index from 0.4 to 0.6 and decreased with further increasing of isocyanate index from 0.6 to 1.0. The storage modulus of the foam samples at higher isocyanate index level had lower frequency dependence within the available frequency range when comparing with that of the samples at lower isocyanate index level. The temperature of the storage modulus peak point increased from 55.8 0.5C (LCS-PU1) to 65.8 0.7C (LCS-PU4) with increasing of isocyanate index from 0.4 to 1.0. The tan d of polyurethane foam samples decreased with the increase of isocyanate index at the same temperature.
(Download PDF) (Export to EndNotes)