ASABE Technical Library - Abstract
Member and Access Notice
Effect of Fill Level in Mixer Viscometry
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.org
Citation: 2009 Reno, Nevada, June 21 - June 24, 2009 096539.(doi:10.13031/2013.27150)Authors: Rabiha Sulaiman, Kirk David Dolan, James Freeman Steffe
Keywords: Rheology, Mixer Viscometry, Fluid fill level, Mixer constant, Mixer coefficient
The effects of viscometer fluid level on the mixer constant (k') and mixer coefficient (k") were evaluated using the torque curve method. Experiments with three levels of fill (multiples of the impeller height) with a Haake Pitched Paddle impeller were conducted. Standard Newtonian fluids (clover honey and corn syrup) and Non-Newtonian fluids (1%A40M and 7%K99) methylcellulose were used to determine the k' and k" values while keeping the impeller Reynolds number in the laminar flow range. Results showed that k' values varied significantly (p<0.05) with fill level while the k" values only at low levels were significantly different (p<0.05). The range of k' and k" values ranged from 3.52 to 11.42 rad-1 and 2892.1 to 2088.8 rad m-3, respectively, for the fill levels studied. Results were verified by comparing the apparent viscosity of ketchup determined with the mixing impeller and a traditional concentric cylinder viscometer. The consistency coefficient was significantly different at the low level (p<0.05). The recommended level of fluid is twice the height of the impeller. This study is useful in mixer viscometry applications aimed at establishing engineering design data and for quality control testing of materials having settling problems, phase separation, or large particles.
(Download PDF) (Export to EndNotes)