ASABE Technical Library - Abstract
Member and Access Notice
Parameterization of Microwave Assisted Oil Extraction from Soybeans
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.org
Citation: 2009 Reno, Nevada, June 21 - June 24, 2009 096421.(doi:10.13031/2013.27130)Authors: Akanksha Kanitkar, Cristina Mirela Sabliov, Sundar Balasubramanian, Dorin Boldor
Keywords: Microwave assisted extraction, oil extraction, soybean oil, oil yield, microwave heating.
Microwave assisted solvent extraction has potential to replace traditional solvent extraction of oils and fats from a variety of feedstock. The purpose of this study was to optimize oil extraction parameters for a batch microwave system from soybeans. The solvent-feedstock mixtures were exposed to microwave radiation for different time-temperature combinations ranging from 60oC to 120oC for up to 20 minutes with simultaneous magnetic stirring. The solvent (ethanol) to feedstock ratio used was 3:1. After extraction, solid-liquid separation was performed in a vacuum filter, and ethanol was evaporated from the filtrate in a vacuum centrifuge. The results showed that the oil yield changes with temperature and achieves a maximum value in a relatively short time (order of minutes). Continuous exposure after this time does not increase the oil yield. The results compared well with traditional solvent extraction, especially when accounting for the extremely short times (minutes vs. hours). Maximum oil yield of 17.3% at 20 min and 120oC was achieved by microwave extraction as compared to 11.3% using conventional heating.
(Download PDF) (Export to EndNotes)