Click on “Download PDF” for the PDF version or on the title for the HTML version.
If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.
Determination of Plastic and Rate-Dependent Properties of Bulk Solids Using Low Pressure Cubical Triaxial Tester
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.orgCitation: 2007 ASAE Annual Meeting 074035.(doi:10.13031/2013.23241)
Authors: Hojae Yi, Anuranjan Pandeya, Virendra M Puri
Keywords: Bulk Solids, Triaxial Test, Cubical Triaxial Test, alumina Leave the word
Since many of the issues in processes involving powder arise in lower pressure regime where self weight is the main source of the pressure, it is valuable to understand the behavior of powder in that pressure range. For this, a flexible-membrane cubical triaxial tester (CTT) with the capability to test a bulk solid’s mechanical properties under dynamic conditions was used. Herein, alumina’s mechanical responses were measured with the CTT. Three different loading rates of 6 kPa/min, 60 kPa/min, and 600 kPa/min were used to determine alumina’s mechanical properties. Hydrostatic compression triaxial tests and conventional compression triaxial tests were conducted. To validate and predict mechanical responses of the alumina powder, parameters were evaluated for the modified Cam-clay model. Test results showed that alumina’s mechanical properties were sensitive to the applied loading rate. Compression index values indicated that alumina became more compressible with the increase of loading rate. Shear strength increased with the loading rate whereas shear modulus decreased when the loading rate increased.(Download PDF) (Export to EndNotes)