Click on “Download PDF” for the PDF version or on the title for the HTML version.
If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.
MECHANICS OF TILLAGE TOOLS
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.orgCitation: No Citation available.
Authors: Gill, William R., and Glen E. Vanden Berg
Keywords: Section Headings and Keywords: Soil Dynamics, Soil Science, Tillage, Traction, The Reaction of Soil to Tillage Tools, Principles for Developing a Mechanics, The Complete Soil-Tillage Tool Mechanics, Mechanics of Simple Reactions, Inclined Tools, Vertical Tools, Cutting of Soil, Soil Behavior in Simplified Systems, Soil-Metal Sliding, Measurement of Sliding Actions, The Sliding Path, Mechanics for Draft Force of Sliding Actions, Scouring, Penetration, Geometry of Soil-Tool Systems, Alteration of Tool Geometry by the Formation and Adherence of Soil Bodies, Alteration of Tool Geometry Because of Wear, Soil-Tool Geometry, Orientation of the Soil-Tool System, Geometry of Interacting Tools, Mechanics of Complex Reactions
Tillage tools are mechanical devices that are used to apply forces to the soil to cause some desired effect such as pulverization, cutting, inversion, or movement of the soil. Tillage tools usually produce several effects simultaneously. The ultimate aim of tillage is to manipulate a soil from a known condition into a different desired condition by mechanical means. The objective of a mechanics of tillage tools is to provide a method for describing the application of forces to the soil and for describing the soil’s reaction to the forces. An accurate mechanics would provide a method by which the effects could be predicted and controlled by the design of a tillage tool or by the use of a sequence of tillage tools. Furthermore, the efficiency and economy of the tillage operation could be evaluated from the mechanics. A thorough knowledge of the basic forces and reactions is required to develop the mechanics. Such knowledge is not available at present, and soil reactions cannot even be predicted, let alone controlled. As a result, an operation is performed, the conditions are arbitrarily evaluated, and additional operations are performed in sequence until the conditions are adjudged to be adequate. Thus, today, tillage is more an art than a science. Progress has been made, however, in developing mechanics where simple tools or simple actions are involved and where forces and reactions can be described. This chapter presents several approaches that have been used to develop simple forms of soil-tillage tool mechanics. Only homogeneous soil conditions are considered. Although this approach is completely unrealistic, it does not negate the results of the studies. Complete knowledge of reactions for a homogeneous soil will provide a basis for solving problems dealing with layered soils. Interactions of importance will probably occur, but they should not present unsurmountable obstacles. The approaches discussed in this chapter do not represent any final solution of the problems that are posed. The approaches, however, do represent those that have been utilized and those that may contribute to the development of a successful mechanics of tillage tools.(Download PDF) (Export to EndNotes)