Click on “Download PDF” for the PDF version or on the title for the HTML version.
If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.
Preparation Characteristics of Monodispersed Water-in-Oil Microspheres by a Polymer Microchannel
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.orgCitation: Paper number 036051, 2003 ASAE Annual Meeting . (doi: 10.13031/2013.15453)
Authors: Haijie Liu, Mitsutoshi Nakajima, Taiji Nishi, Toshinori Kimura
Keywords: microchannel emulsification, monodispersed microspheres, water-in-oil emulsions
In this study, a low cost polymer microchannel (MC) plate with high resistance to alkali was used to produce monodispersed microsphere (MS). The effects of pressure and concentration of surfactant on the average diameter and coefficient of variation (CV) of MS produced by the polymer MC were investigated. The results indicated that when tetraglycerin condensed ricinoleic acid ester (CR-310) was used as surfactant, monodispersed (CV, about 5%) water-in-oil microspheres (W/O-MS) ranging from 40-60 m in average diameter were produced successfully using a polymer MC with the dimension: width 20 m, depth 10 m, length 120 m, and terrace length 30 m. The optimum pressure zone to produce MS was 0.4-1.0 kPa. It was also found that the concentration of surfactant had little effect on average diameter and CV of MS in polymer MC emulsification process. A silicon MC plate with similar dimension to the polymer MC was tested for comparison, and little significant difference was observed in the average diameter and CV of MS.(Download PDF) (Export to EndNotes)