Click on “Download PDF” for the PDF version or on the title for the HTML version.
If you are not an ASABE member or if your employer has not arranged for access to the full-text, Click here for options.
An Elasto-Viscoplastic Formulation that Accounts for Effect of Pore Air on Powder Compression Process
Published by the American Society of Agricultural and Biological Engineers, St. Joseph, Michigan www.asabe.orgCitation: Paper number 034027, 2003 ASAE Annual Meeting . (doi: 10.13031/2013.14091) @2003
Authors: B. Mittal, V.M. Puri
Keywords: Dry powder compression, PSU-EVP model, elasto-viscoplasticity, pore air compression, cubical triaxial tester, triaxial testing, mechanical property determination
The aim of this research was to measure and analyze the rate-dependent mechanical behavior of a dry industrial powder (named MZF powder) undergoing compression in a medium pressure flexible boundary cubical triaxial tester (CTT). The mechanical behavior of the powder was modeled using a new elasto-viscoplastic model (PSU-EVP model). The mechanical properties of MZF powder were studied under different types of stress paths: isotropic (or HTC) and shear (or CTC). Three different compression rates of 0.62, 6.21, and 20.7 MPa/minute were studied at pressures below 14 MPa. Test results demonstrated that the compression and shear responses of the powder were non-linear. Also, MZF powder exhibited varying elastic and plastic deformation at different pressure levels that were quantified by developing numerous statistical correlations (R2>0.90). For example, the average bulk modulus and shear modulus values for MZF powder increased linearly with pressure (R2>0.90) at all compression rates. From the data collected, it was proved that the CTT is a reliable tool for gathering triaxial test data on powders with high consistency and reproducibility of test results (coefficient of variation or COV = 15%). Additional parameters for the PSU-EVP model were also quantified.(Download PDF) (Export to EndNotes)